Home

Links

Products

About Us

Contact

News

Join the NRA
or Renew and get
$10.00 off

WWW.RoyTailors.com

CCW

Training

Ohiogunclass
.com

One Day!

http://freedomfirearmsco.com/

If you know of more, please forward them to me and I will get them posted to help out others too.

I have gone down to Roy Tailors Uniform Co.
Several times and purchased these to have on hand for fitment trials
This not a complete list by any means but it should help get you on the right
track.

We will start with the M30 as this is the one
That I get the most questions about.

I have found several that work well with this light:
**I have pictures of them below**

*First is the: 7050-705-110 , not sure of the brand.
(It is made to fit the Pelican- M-9 Rechargeable)
It works very well with the regular tail cap and really well with the smooth. It does have a infrequient tendancy to flash on for a moment if you put pressure on the bottom of the holster, with the smooth cap installed.

• Next is the " Stallion SLD-DS-1

(the last number tells the finish 1=Smooth 2=Basket Weave 3=Patton leather "Shiny" 4=Nylon.
This one works well with either Standard or smooth tail cap and with or without the extension tube installed.
With the smooth tail cap and the extension installed it had a tendancy to come on. We corrected that with a small relief hole at the bottom and had no more issues.

In addition to the "Flashlight Holders" Most of the Baton holsters do well
also. I have a few examples here. There are many more I am sure.

Uncle Mikes has several that I found that worked well with the smooth tail cap.
First is 7482-8 in gloss black. It is classified as a Expandable Baton Holder.
It worked best with the smooth tail cap and without the extension tube.
(3 Battery configuration)

Uncle Mikes also makes an open or closed flashlight holder
#8818-3 that worked well in the same configuration
it is available in Mirage or Kordra Nylon finishes.

The next holster is by Stallion Leather.
SSH-1 Open design
The M30 is held very well in this holster.
fits the Stinger/ Super Stinger and Inova
It also fits the M20 and M21 Warriors
(Without the cigar hold installed)

Also fits the M20 and M21

Also fits the M20 and M21

The Safari Land Baton Holster
Model 306-1 Stinger fits the M30 well.
It works well on the M21 as well. For some reason the M20 is a little loose in this holster.

Thanks to Keith Staton
for loaning me his holster.

I believe that they offer other
finishes for this holster.

The 7418-1 Plain
Fits the T20 and I20 Series very well.
It is avialable in several finishes

The Stallion SFR-LED
 works well with either the M20 or M21
Without Cigar ring installed

At the Dayton Gun show I had One of the Vendors Make a Kydex Holster for me.
I wanted it to fit several sizes and had them open the end up so that the lights sat farther into the holster. One of the side benefits is that the lights can go in facing up or can be put into the holster from the bottom as well and holds very well. I would suggest to have them install 2 belt holders and get the variable tension screws installed too.

Also fits the M21 Very well.